Magerit Polyseq, Руководство пользователя, Страница: 14 / 22

14
Connect the module to the Eurorack and the PSU. It only needs a voltage of +12V. Once turned on, you will
see the Magerit logo and the main screen . The main screen shows each selected pattern step (from out 1
to 4).
Press quickly (less than 0.5
seconds)the encoder to load
the sequence of the selected
OUT.
The line indicates encoder
current position.
Turn the encoder to navigate in
this menu. Once you have selected
your desired submenu, press the
button quickly.
The dot is a scrolling indicator
of the menu
User guide
PATTERN
Here you will program all sequences (number of steps, notes and ratio)
SEQ
Select the pattern to play on each output or choose a native CLOCK output.
CLOCK
Edit master’s clock tempo and all individual CLOCKs outputs.
CV
Configure all CV parameters.You can select the MIDI chanel (1 to 8 or OFF),
the response between PITCH, GATE and TRIG and the POLYPHONIC mode.
TUNE
Tune each output.
RESET
Select which OUT will be reseted when a signal is received in the RESET
input.
WIPE
Wipe permanently all Polyseq configuration.
Turn the encoder to select your desired OUT and press its button. A little square will appear. Well,
you have already enabled the output. That means that, once a clock signal is introduced (analog,
MIDI or internal), the pattern of this OUT will be played.
In the new Magerit Polyseq firmware it s possible to use an internal clock. You wont need to
connect the module to any clock source. Great! Now, we need to configure other parameters of the
sequence.
Press for 1 second to enter to the config menu. (You don’t need to select any OUT with the
encoder).