Magerit KAIROS, Руководство пользователя

Страница: 36 / 39

36
Magerit
LONG PRESS
CALIBRATE
FACTORY RESET
CREDITS
OSC. RATE
OP
TIONS
You can configure the duration of a long press for encoders and buttons in seconds.
Each of the 8 outputs has its own calibration to ensure better tuning and precision. By pressing the
SMALL encoder, you can access the CALIBRATION window, where the instructions will be displayed. The
calibration is automatically saved. Connect a voltmeter or any device capable of measuring voltage to
each output. Use the LARGE encoder to select the channel and the SMALL encoder to edit the calibra-
tion. To proceed with the calibration of the remaining voltages, press any encoder.
Deletes all information stored in the module, including calibration. This step cannot be undone!
KAIROS, created by David Vijuesca and José Vijuesca in Alcorcón, Madrid.
The range of the oscilloscope display can be adjusted using the divisor. A higher divisor value will
result in a wider display range, making the visualization “slower”.
SETTINGS menu (cont.)
While in any screen, such as PATCHES or CALIBRATION, pressing the LEFT button will take you back to the previous
menu. If any action was in progress, it will be cancelled. To exit SETTINGS, press the LEFT button.