ADJUSTING THE MAGENTA TT10 TURNTABLE
to the record. The standard today is 20º. Vintage cartridges from
the nineteen sixties for instance have a tracking angle of 15º.
The final VTA adjustment will be done later after you have
adjusted the azimuth and down force and bias have been precisely
set.
The VTA adjustment is possible thanks to three screws in the base
of the arm.
The Margules A1.2 TT10 arm is unipivot, It is important that the
tonearm is free and can have movement to the sides up and
down.
If the base is not level properly you might have problems with the
arm elevator or restrictions the movement.
AZIMUTH ADJUSTMENT
Now check the cartridge seen from the front. It should be
perpendicular to the record. This is easily checked using a small
mirror. A precise way of measuring the azimuth is by using a test
record and a voltmeter. But this can only be done after the correct
down force and bias have been adjusted.
In Margules Arm this can be adjusted by rotating the eccentric
weight in the back of the arm.
Содержание TT10
