INSTALLING THE LIPSTICK LNB
The Lipstick LNB allows you to see a DirecTV satellite that is only 2 degrees offset from the main
Direcway satellite.
This is the Lipstick LNB… named because it looks like a
tube of lipstick where the DirecTV signal enters.
You will be installing the lipstick LNB under the brown
bracket. You will need an Allen wrench to remove the 2
screws (one is already loosened in this picture)
Also, you will need to temporarily remove the GPS sensor
from the dish arm to install the LNB.
The GPS Sensor is attached to the Dish Arm with Velcro.
Simply pull off the sensor. You will push it back into
place after you’ve installed the lipstick LNB.
