(12/07)
Calibrating the Electronic Compass
T-101
5. The gray ‘bubble’ in the inner ring of the compass should be
pointing North. If it does not you should select the “Reset”
button to return the compass to factory settings before
continuing.
Select “Start” to begin the calibration.
6. To perform the calibration you must rotate the receiver keeping
the arrow (displayed outside the compass rose) pointing directly
towards you.
The inner portion of the compass displays how much of the
calibration has been completed.
As the calibration contines, the inner portion of the compass
continues to fill.
7. When the calibration has been completed successfully, a pop-up
window is displayed confirming the completion of the calibration
routine.
If the calibration is unsuccessful, an alert will be displayed and
you will need to repeat the calibration routine.
Press
ENTER
to close the pop-up window.
8. When you are done with the compass calibration, press
ESCAPE
twice to return to the Compass screen.
