en 7
The ToughCase GPS receiver and your iPhone
or your iPod touch are both charged when
Master Power switch is on, a USB cable or
USB power adapter is connected and the
power mode is set to Battery Only or
GPS.
ToughCase Battery Status.
The four
LEDs at the bottom of the ToughCase GPS
receiver display the battery charge when the
battery button (below the LEDs) is pressed.
Battery Charge - LED Indicators
<10%
Charge
10 - 24%
Charge
25 - 49%
Charge
50 - 74%
Charge
75 - 100%
Charge
Using the ToughCase with Your
iPhone
The ToughCase GPS receiver has an earphone
opening just above the display lens and a
microphone opening at the bottom. To use
your iPhone as a cell phone while it is
installed in the ToughCase GPS receiver, just
hold the top of the ToughCase GPS receiver
to your ear and speak normally.
