English
37
-
Tap
OK
. The name of the configuration you have just cre-
ated is now pre-selected in the
NTRIP Configuration
field.
Two new buttons (
Edit
and
Delete
) are shown under this
field allowing you to respectively edit or delete this config-
uration. When you edit an existing configuration, note that
you cannot change its name.
To create a second NTRIP configuration, you would tap
the down arrow to the right of the
NTRIP Configuration
field
and select
New
. The
Add
button would appear again under
the field. You would then tap this button, enter the five
parameters of the second configuration and tap
OK
to save
this new configuration.
-
After selecting the desired configuration from the
NTRIP
Configuration
field, tap
OK
. MobileMapper CE connects to
the NTRIP caster. The NTRIP Settings window is dis-
played again on which you can choose a network and sta-
tion (corrections source) from the caster.
-
The best choice is to use the station the nearest to your
current location. Tap on the
Find Nearest
button to find and
select this station. This causes the
Network
and
Station
fields to be automatically updated. The distance to this
station is indicated just underneath the
Station
field. A
second parameter in the same line tells you whether the
selected station provides VRS corrections data or not (VRS
for “Virtual Reference Station”; if VRS, the station pro-
vides corrections data for a virtual station that would be
located where you are. If not VRS, the corrections data are
computed for the true location of the station).