Wireless Keypad Signal Strength
To view the wireless keypad signal strength, see sections [575] to [578]:
Wireless Keypad Options
To toggle wireless keypad supervision options, see section [580]:
Display Mode
To toggle Display Mode, see section [580]:
The MG32LRF has two display modes. By default, the keypad will show all events (e.g. zones in alarm,
bypassed zones, etc.) live as they occur. Alternatively, with Live Display Mode off, the system will only
display zones that cause an alarm or entry delay. If you want to see the status of all zones, press the [ ]
key. Zones that are open but have not triggered an alarm will only be displayed after pressing the [ ]
key. The display will appear for 30 seconds, showing the status of all zones at the time the [ ] key was
pressed. The zone display will shut off after 30 seconds.
Power Save Mode
If the keypad’s DC adapter is not connected, the keypad’s display will shut off and go into power save
mode after one minute to conserve battery life. Press the [ ] key to activate the display.
IMPORTANT
: When the keypad is in power save mode, no events will be displayed. For example, alarms
and entry delays will not be visible in power save mode. Press the [ ] key to activate the display and
see the status of the system.
Power / RxTx LED
On = Power of panel (not keypad).
Fast Flashing = Transmission/reception in progress.
Trouble
Group [16]: Wireless keypad communication failure.
[575]
Wireless Keypad 1 Signal Strength
[577]
Wireless Keypad 3 Signal Strength
[576]
Wireless Keypad 2 Signal Strength
[578]
Wireless Keypad 4 Signal Strength
RSSI - Receiver Signal Strength Indicator (1 = weak signal, 10 = strong signal)
Signal Strength
Keypad Audible Indicator
1 to 4 (relocate wireless keypad)
1 beep
5 to 7
2 beeps
8 to 10
3 beeps
Option
OFF
ON (default)
[1]
Keypad 1 Supervision
N
Disabled
N
Enabled
[2]
Keypad 2 Supervision
N
Disabled
N
Enabled
[3]
Keypad 3 Supervision
N
Disabled
N
Enabled
[4]
Keypad 4 Supervision
N
Disabled
N
Enabled
Option
OFF
ON (default)
[8]
Live Display Mode
N
Disabled
N
Enabled
Technical Specifications
RF frequency
433MHz or
868MHz
Range (typical in a
residential environment)
40m (130ft)
Main Power Source 6Vdc (300mA)
Compatibility
Magellan MG5000
(V1.30 or higher)
Backup Battery
3.7Vdc Li-ion
rechargeable
Operating temperature
0°C to 49°C (32°F to
120°F)
Standby Power
(Backup Battery)
Up to 48 hours
paradox.com
Printed in Canada - 10/2006
MG32LRF-EI00
