Assembly Instructions
Step 5:
FIG.7
Align the J-Holder (I), Top Upright, and Bottom
Upright mounting holes. Install and tighten
(do not
firmly tighten yet)
M8X75 Round Phillips Screw (6),
Ø8mm Washer (3), and M8 Nylon Lock Nut (4).
FIG.7
There are several mounting holes on Top & Bottom
Uprights. Options for assembling the J-Holders to
different positions to suit your best need.
•There are two J-Holders with logo, and two without.
Mount two J-Holder with logo to the middle of
Bottom Upright; the two without logo to the top
Upright.
Align the L-Holder (J) and Leg Frame mounting holes.
Install and tighten
(do not firmly tighten yet)
M8X75 Round Phillips Screw (6), Ø8mm Washer (3),
and M8 Nylon Lock Nut (4).
•There are several mounting holes on Leg Frames,
options for assembling the L-Holder to different
positions to fit different sizes of kayak or canoe here.
FIG.8
* To complete the J-Holder & L-Holder assembly,
you will need
M8X75 Round Phillips Screw x
12pcs
,
Ø8mm Washer x 12pcs
and
M8 Nylon
Lock Nut x 12pcs
. Hardware for this assembly is
packed together.
FIG.8
Page 8 of 15
