Magellan DirectRoute 3.0, Быстрый старт

Страница: 23 / 108

21
Street Route to a Point of Interest or Previous Destination
Routing to a point of interest or waypoint is very similar to address routing.
Press GOTO, pick Street Route and choose one of the POI categories from the
list. The window at the bottom of the screen lets you decide whether to show
POIs alphabetically or just see a list of those nearest to your current position.
Routing to a previous destination is a choice that becomes visible in the Street
Routing menu, if you have previously used street routing. If you select Previous
Destination from the first street routing menu, it will present a list of the last
10 POI and address destinations you’ve used. DirectRoute only holds ten
previous destinations. Many POI categories in the list have subcategories.
Please take a few minutes to review the POI list. It will help you to find
services quickly while you travel.
Making a Street Route from a Saved Waypoint Route
It’s possible to convert a saved Waypoint Route into a Street Route if the start
and end points are within the active detailed map. Press MENU and select
Routes. Arrow down to the route you want to use from the list. Press MENU
again and choose Activate Route from the list. Select Street Route. The
handheld will calculate and activate the route. The street route may differ
significantly from the manually built waypoint route.
Guidance on the GPS Receiver
DirectRoute guidance is a simplified version of what you would find in
expensive vehicle navigation systems. There are two ways to obtain guidance
from the GPS receiver using DirectRoute – the Map View and the Route List.
In Map View, the active route is highlighted onscreen. The icon for the next