15
in
fo@mag-audio
.c
om
Tel./F
ax:
+
38 044 277
-4
7-89
www
.mag-audio.com
Z Series User Manual rev 2.10
Z series powered full-range
speaker’s amplifier
Z series powered subwoofer’s
amplifier
4. VOLUME KNOB. Used for adjusting
the volume of the system. Remember
to turn the volume down before
connecting/disconnecting INPUT or LINK
connectors.
5. LIMIT LED. Is lit when limiter is
operational, indicating excessive signal
through the system.
6. READY LED. Is lit when system is fully
operational.
7. BT/USER EQ BUTTON (Full-range
systems). Engages BlueTooth controls on
BlueTooth enabled versions. Engages HF
boost filter for farfiled applications for
versions without BlueTooth support.
8. MODE BUTTON. Engages the
feedback suppression contours for stage
monitoring appication.
9. HPF. Engages the high-pass filter.
10. BT/USER EQ BUTTON (Subwoofer
systems). Engages BlueTooth controls
on BlueTooth enabled versions.
Engages custom LF boost for different
bass experience for versions without
BlueTooth support.
11. PHASE BUTTON. Switches the
polarity of the subwoofer.
12. LPF BUTTON. Engages the low-pass
filter.
13. INPUT CONNECTOR. Used for
connecting the system to the signal
source (mixing console etc.)
14. LINK CONNECTOR. Used for linking
additional compactible system to the
same signal source.
15. HEAT SINK. Do not close the
ventilation openings on the heat sink, as
it may cause the system to overheat and
switch off by itself.
16. MAINS IN. Used for connecting mains
supply to the system.
17. MAINS OUT. Used for feeding the
mains supply to the additional system.
5.9. Powered speakers
180
°
0
°
4
4
5
7
10
8
11
9
12
5
6
6
13
15
16
17
17
15
16
14
14
13