USING REMOTE CONTROL TO CONTROL THE DEVICE
Remote Control with
additional programmable
section.
For convenience this RCU has additional section
of programmable buttons. You can program
these buttons, for example, to control your TV.
RC has two LED lights to indicate of button
presses and operational modes. The green
indicator lights when any button pressed on the
base RC section. Red indicator is used to program
buttons from additional section.
Programming the RC:
To programm button from additional section
please do as follows:
1. Press "SET" button and hold it for about 2
seconds. When red indicator becomes
brighter the RC is ready to program.
2. Press the button you want to program. Red
indicator starts blinking.
3. Dispose emitters of two RC opposite each
other at a distance 10 mm and press the
button on the other RC to be used as a
source for programming and hold it for 2
seconds.
4. After three quick blinks red indicator will
stop blinking. Now you can program next
button.
5. Please program all buttons you needed as
described above.
6. Press "SET" button to save all programming
progress.
Programmable section
Left
Right
Up
Down
OK / Enter
Exit
Main menu
Additional information
Back to previous
Additional function
Channel listing
:
+
FORWARD
/ -
BACK
Page listing
:
+
FORWARD
/ -
BACK
Fast play
Volume
:
+
MORE
/ -
LESS
Change screen aspect
Delete symbol
TV channell selection buttons
or keyboard for text
Rewind
Fast forward
Play / Pause
Stop
Context menu
Quick access TV
Virtual keyboard
Audio On / Off
Change audio mode
On / Off
Setting menu
Channel listing
:
+
FORWARD
/ -
BACK
Play
/
Pause
Back to previous
OK/Enter
On/Off
Exit
Main menu
Rewind
Fast forward
Additional information
Left
Up
Down
Favorites
“Picture in picture”
function
Switch windows
Stop
Right
Audio On/Off
Set / Change time
Record
Service
Change audio mode
Virtual keyboard
Context menu
Quick access TV
Additional
features
Page listing
:
+
FORWARD
/ -
BACK
Fast play
Volume
:
+
MORE
/ -
LESS
Change screen aspect
Delete symbol
TV programm guide
TV channell selection buttons
or keyboard for text
Your supplier optionally can provide the product with an alternative RC.
Remote Control
This section explains how to unpack Remote Control (RC) and prepare it for
work.
Your service provider can supply the product with an alternative RC. In that
case please refer to the manual supplied by your service provider.
Inserting batteries
Remote Control requires two batteries type AA, R6, LR6, UM-3, 316, A316.
Important information about using batteries
Do not mix different types of battery or old and new batteries.
Do not use rechargeable batteries with the remote control.
Remove the batteries from the remote control if you are not going to use it for
several weeks, to avoid the risk of leakage.
Please respect your environment and any local regulations and dispose of old
batteries in a responsible manner.
Inserting batteries into Remote Control.
Shift the battery cover located
on back side of RC as shown
in the picture.
Insert two batteries type AA
(included in package) taking care
to observe the correct polarity
as shown on RC.
Replace the battery cover as
shown in the picture.
Average lifetime of a batteries
is about 1 year.
Connecting on the Back Panel
Digital TV Connecting to the Network
MAG250 Micro receives TV channels and movies from the “digital TV” network.
Your services provider had been already installed the connection with the mentioned network.
• Connect cable for “digital TV” network into “digital TV”/Ethernet port on your product.
Caution!
Do not attempt to recharge the batteries.
Immediately remove any leaking batteries. Take care when handling leaking
batteries as they may cause burns to the skin or eyes, or other physical injuries.
BACK PANEL
MAG250
MICRO
ABOUT YOUR MAG250
MICRO
About your MAG250 Micro
Thank you for purchasing of our product MAG250 Mcro, which makes it possible to possess access to TV and movies through your
digital television service.
You can control all functions of MAG250 Micro by using remote control for navigating on screen menu provided by your service
provider.
Getting Started
Please become acquainted in the next chapter how unpack and turn on power supply your MAG250 Micro.
In case of your product had been already adjusted for you by your provider look into “Use of Remote Control to control the device” for
information how to use the product.
CONNECTING TO
MAG250 MICRO
The product and accessories are packed into recycled package and plastic bags. Please keep all the packing materials for the further transportation.
MAG250 Micro is delivered with the following accessories:
After the product extraction out of the
with other objects as well. The power supply
The Arrangement Designation
package it is necessary to handle it with care,
cord is not to be laid under the carpets or
The product is designed to receive and record
do not drop, shake it and afford other
blocked with anything where any damage
TV pictures and sound signals. Any other use
influence.
may not be noticed.
is prohibited.
The product is designed for horizontal
Power supply unit
It means Telecommunication Technologies
allocation onto flat surface.
The product should be used with power
insists on the product usage in entirely
Do not place the product onto slippery
supply unit provided by the manufacturer
accordant to the law of copyright. The
surface, in place where it may be exposed to
only.
compliance with the specified laws leaves on
vibration or hazard to drop and other
conscience of the user. The unauthorized
The power supply unit is fitted out with plug
possible risks to the product to be damaged
copying of the protected materials or
which is intended for connecting to socket in
which may cause invalidation the product
spreading of the specified copies under
your country usage. In case of the necessity in
guarantee.
definite conditions may violate the law of
the product connecting in other country or in
copyright and is to be previously adopted by
Do not dispose the product onto soft surface
the region with other data of electric circuit
possessor of the rights for the further
like on the carpet, bed, etc., for such surfaces
the power supply unit adopted for use in the
commercial use.
cease access to the ventilation openings and
specified area should be received from the
complicate air flow that may cause to the
manufacturer.
Updating Software
product overheating and to invalidate
Operation
The product possesses the capability of
guarantee in result.
automatic software updating.
The outer power supply unit of the product is
Do not locate the product into the furniture
getting warm in operation. In case of outer
The manufacturer and your services provider
in case of vacant clearance around the
power supply unit gets hot, switch off
reserve the right for automatic software
product is not provided for the sufficient
promptly and get in touch with the
updating to improve the product functional
product ventilation.
equipment supplier for its replacement.
capability.
Do not place the product in place where it
Protection from atmospheric electricity or
During the software updating the product
may be exposed to influence of direct
should not be used for watching and
not using for a long time.
sunlight, next to the sources of open fire and
switched off until the complete software
On coming the thunderstorm and also in case
convectors.
updating.
of the product is intended to be in no use for
Do not dispose the product on surfaces
During the software updating the product
a long time, disconnect the power supply
which in operating process may get warm, for
switching off is inadmissible. The updating
cord out of socket, switch off Ethernet, video
instance,
takes several minutes and since then you are
and audio cables.
video record player or intensifier and do not
able to continue enjoy on all delights of
It is to protect the product from thunder
put anything on the top of the shell as well.
digital television services.
discharges and power surges in the circuit..
Do not cover the product with anything.
Usage with Plasma Displays
Containing liquids objects, such as vase, plant
In the product usage for watching with
pot are not to be placed next to or on the
plasma screens do not pause the picture
product.
more than 5 minutes, otherwise it may cause
Do not touch or move the product during its
‘burn-out’ pixels on the screen. It is not
operation. Switch off the product if you need
considered as a defect of the product but
to shift it.
peculiarity of plasma screens structure. The
The product is intended for use indoors.
producer does not bear the responsibility for
damages had been caused in such manner.
The power supply cord is to be put to prevent
its deformation and jamming and touching it
Warning!
Switch off all arrangements (TV, intensifier, etc.) and take power supply out of socket before connecting and
any cables disconnecting.
In case of the intensifier does not connected leave digital audio outlets of your product not connected.
Video Connecting
Audio Connecting
The product allows connecting the following video cables:
The product allows to conduct the following connections:
• HDMI – provides the best quality of picture and allows
•
Left and right channels for playing stereo sound through (L
playing of digital video of high definition (HD).
and R outlets).
• Composite (CVBS) - enables standard picture quality.
Use the connection with the best quality which could be
applied with your equipment.
• In case of your TV has HDMI inlet, use HDMI cable for the
product connecting to TV through HDMI outlets.
• In case of your TV is capable to operate with connection
through component video inlet, use component video
cable for the product connecting to TV through
component video outlets.
Attention!
In all cases follow coloration of
connectors and sockets on your equipment.
Attention! After the product unpacking please wait up
until the arrangement warms up to indoor
temperature to avoid condensation which may cause
short circuit.
Audio
/
Video
cable
RCA - 3,5 mm TRRS
Batteries for IR Remote
А
A-size
2
pcs
.
IR remote control
Instruction manual
Outer power supply unit
In case of absence of any of the specified accessories please refer to your services provider.
UNPACKING AND INSTALLATION THE PRODUCT
The typical product connecting to TV and audio intensifier is shown on the presented diagram:
Connector
:
Cable
:
Video
:
Audio
:
HDMI
HDMI
SD + HD
digital
Connector
:
Cable
:
Video
:
Audio
:
CVBS, L, R
3x RCA - 3,5mm jack
only
SD
analog
Composite video signal.
For video/audio connection
CONNECTING TO TV-SET WITH HDMI CONNECTOR - BEST QUALITY
HDMI
CONNECTING TO TV-SET (AUDIO/VIDEO INPUT) - GOOD QUALITY
AUDIO IN
VIDEO IN
