FOCUS Series User Manual rev 1.00
in
fo@mag-audio
.c
om
Tel./F
ax:
+
38 044 277
-4
7-89
www
.mag-audio.com
13
Focus 12A and Focus 15A
control panel
Focus Sub A control panel
5.4. Powered speakers
6
6
8
8
1
1
10
10
11
11
12
12
2
2
3
3
5
5
7
7
9
9
4
4
LIMIT
TEMP
SIGNAL
READY
PRESET1
PRESET2
PRESET3
PRESET4
PRESET
SELECT
LIMIT
TEMP
SIGNAL
READY
PRESET1
PRESET2
PRESET3
PRESET4
PRESET
SELECT
1. VOLUME KNOB. Used for adjusting the
volume of the system. Remember to turn
the volume dowm before connecting/
disconnecting INPUT or LINK connectors.
2. LIMIT LED. Is lit when limiter is
operational, indicating excessive signal
through the system.
3. TEMP LED. Is lit when tempreture
protection is in place, indicating
overheating.
4. SINGAL LED. Is lit when signal is
present on the INPUT connector.
5. READY LED. Is lit when system is fully
operational.
6. PRESET LEDS. Indicate the currently
selected system preset. For preset
description, refer to the “5.4.1 Preset
description” section of this manual, page
15.
7. LINK CONNECTOR. Used for linking
additional compactible system to same
signal source.
8. INPUT CONNECTOR. Used for
connecting the system to the signal
source (mixing console etc.)
9. PRESET SELECT BUTTON. Used for
switching currently selected system
preset.
10. HEAT SINK. Large heat sink for
effective heat dissipation.
11. PowerCon A CONNECTOR. Used for
connecting mains supply to the system.
12. PowerCon B CONNECTOR. Used
for feeding the mains supply to the
additional system.
