MAG TOOLS AWP099, Руководство по эксплуатации и обслуживанию

Страница: 2 / 24

TABLE OF CONTENTS
Introduction 2
Safety Instructions 3
Specifications 4
Getting Started 5
Tool Components 6
Contact Information 8
INTRODUCTION
The
Mac Tools
™
AWP099, AWP099-6 and AWP099-S
are precision-built tools, designed for professionals for
high torque assembly and disassembly of threaded fasteners. These tools will deliver efficient, dependable
service when used correctly and with care. As with any fine power tool, for best performance the manufactu-
rer’s instructions must be followed. Please study this manual before operating the tool and understand the
safety warnings and instructions. The instructions on installation, operation and maintenance should be read
carefully, and the manuals kept for reference. NOTE: Additional safety measures may be required because of
your particular application of the tool. Contact your
Mac Tools
representative or distributor with any questions
concerning the tool and its use.
Mac Tools
505 North Cleveland Avenue
Suite 200
Westerville, Ohio 43082
800.MACTOOLS
MACTOOLS.COM
MACTOOLS.COM
2
Do not use damaged, frayed or deteriorated air
hoses and fittings.
Air powered tools can vibrate in use. Vibration,
repetitive motions or uncomfortable positions
may be harmful to your hands and arms. Stop
using any tool if discomfort, tingling feeling
or pain occurs. Seek medical advice before
resuming use.
Do not carry the tool by the hose.
Keep body stance balanced and firm. Do not
overreach when operating this tool.
IMPORTANT SAFETY INFORMATION ENCLOSED.
READ THIS MANUAL BEFORE OPERATING THE MACHINE.
SAVE FOR FUTURE REFERENCE
FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY.
Always wear hearing protection when operating
this tool.
Always turn off the air supply and disconnect
the air supply hose before installing, removing
or adjusting any accessory on this tool, or before
performing any maintenance on this tool.
Always wear eye protection when operating or
performing maintenance on this tool.
Operate at 90 psig (6.2 bar / 620 kPa) Maximum
air pressure.
WARNING