Chapter 11
Initiating Radio Enable
Prerequisites:
In One Touch Access, set the
<required call type>
to
Radio ENABLE
.
Procedure:
1
Select the channel with the subscriber ID that you want to enable transmission from.
2
Press the programmed
One Touch Access
button.
When your radio transmits enable signal, the red LED illuminates.
NOTICE:
Your radio may transmit enable signal up to three times.
If initiating radio enable is successful, your radio shows the following indications:
• A positive indicator tone sounds.
• The green LED blinks once.
If initiating radio enable is unsuccessful, a negative indicator tone sounds.
The receiving radio restarts.
MN007942A01-AA
Initiating Radio Enable
25