Chapter 12
Initiating Radio Disable
Prerequisites:
In One Touch Access, set the
<required call type>
to
Radio DISABLE
.
Procedure:
1
Select the channel with the subscriber ID that you want to disable transmission from.
2
Press the programmed
One Touch Access
button.
When your radio transmits disable signal, your radio shows the following indications:
• A tone sounds.
• The red LED illuminates.
If initiating radio disable is successful, your radio shows the following indications:
• A positive indicator tone sounds.
• The green LED blinks once.
If initiating radio disable is unsuccessful, a negative indicator tone sounds.
The receiving radio shows the following indications:
• A tone sounds.
• The red LED blinks once.
MN007942A01-AA
Chapter 12 : Initiating Radio Disable
26
