R e c h a r g e a b l e F l a s h l i g h t
MR Rev.1 8/03
25
421-000-438
STEP 13
Push the CLIP (2) into the CHARGER
CRADLE (1) and hold it with your thumb.
STEP 14
While holding the CLIP (2) with your thumb
insert the CIRCUIT BOARD (3) into the
CHARGER CRADLE (3) make sure the two
spring loaded pins line up with the two
holes in the CHARGER CRADLE (1) and the
LED is lined up with the rear hole in the
CHARGER CRADLE (1).
STEP 12
Insert one end of the CLIP (2) into one of the
openings, bow the CLIP (2) and insert the
other end of the CLIP (2) into the other
opening.
STEP 15
Push the CIRCUIT BOARD (3) down until it
bottoms out and is seated into the CHARGER
HOLDER (1).
