MAFI Trac T225, Руководство по эксплуатации

Страница: 112 / 144

OPERATION
WORKING WITH COUPLING EQUIPMENT
110 Operating manual T225 / 230
Unhitching semi-trailers
Fig. 102: Controls
1 “Fifth wheel coupling” switches
2 “Fifth wheel coupling” control light
3 “Kingpin” control light
T h e f i f t h w h e e l c o u p l i n g c a n o n l y b e o p e n e d w h e n t h e
M T i s a t a s t a n d s t i l l .
Unhitching procedure
X
Park the MT and apply the parking brake.
X Lower the supports of the trailer.
X
Secure the semi-trailer against rolling away.
X Disconnect the electrical lines.
X
Disconnect the coupling heads of the air hoses.
First, disconnect the coupling head of the supply line (red);
this brakes the semi-trailer.
Then after that, disconnect the coupling head of the brake
line (yellow).
X Hook the coupling heads into the intended holding fixtures.
You thereby protect the coupling heads from soiling and
damage.
X
Engage the reverse gear and release the parking brake.
X Roll backwards slightly with the MT.
X
Press both switches 1 simultaneously in the instrument
panel to unlock the fifth wheel coupling.
3
The control light 2 in the instrument panel goes out.
X
Switch the driving direction.
X Keep the “fifth wheel coupling” switches pressed and drive
the MT forwards.
Do not release the button 1 until the kingpin is outside the
coupling.
3
The control light 3 in the instrument panel goes out.
00 00000
°F 250
105
175
km/h
MPH
120
80
40
C
0 4/4
1/2
1
11-C26-067-017A-2
3