MAFI MT 25, Руководство по эксплуатации

Страница: 78 / 144

OPERATION
MULTI-FUNCTION DISPLAY
76 Operating Manual MT 25 / 30 YT
Deviations from the nominal specifications that could damage
the MT are indicated by an LED directly on the button,
see “Indicators on the multi-function display” on page 125 .
Selecting the reserve pressure indicator
Depending on switch position, the corresponding air reserve
pressure is shown on the display.
Fig. 66: Air reserve pressure switch
1 Air reserve pressure switch, rear axle (circuit 1)
2 Air reserve pressure, front axle (circuit 2)
3 Air reserve pressure, parking brake (circuit 3)
X
Place the switch in the desired position 1, 2 or 3.
3
The corresponding air reserve pressure is shown in the
LCD display.
T h e s e l e c t e d i n d i c a t o r r e m a i n s a c t i ve u n t i l yo u sw i t c h
t o a n ew i n d i c a t o r.
On-board voltage indicator
Fig. 67: On-board voltage indicator
1 “On-board voltage” indicator
2 “On-board voltage indicator” button
The on-board voltage indicator shows the current charging
voltage of the vehicle battery. The display indicates the charg-
ing voltage. If the charge falls below the necessary charging
voltage, an LED lights up above the button and a warning sig-
nal sounds,
see “Indicators on the multi-function display” on
page 125 .
Select on-board voltage indicator
X Press switch 2 .
3
The LCD display indicates the charging voltage.
X
Press switch 2 again.
3
The LCD display shows the driving speed again.
4