Z5Ec
14
02/2022
4.5
Changing and adjusting the saw band
Caution
Risk of injury from a stopped saw band
The saw band is sharp. You can hurt yourself when you work on the saw band.
➢
Wear protective gloves when you work on the saw band.
➢
Be careful when you work on the saw band.
Use the following procedure to change the saw
band:
1.
Pull out the power plug of the machine.
2.
Loosen the knurled screw (2) and remove the
upper cover.
3.
Loosen the knurled screw (8) and remove the
lower cover.
Fig. 3: Removing upper and lower cover
4.
Loosen the two fillister head screws (11) and
remove the band guard (12).
Fig. 4: Removing the band guard
