-16-
2.3
Technical data
Universal motor, radio and TV
interference suppressed
230 V~, 50 Hz
Power input (nominal load)
1000 W
Current at nominal load
4.6 A
Idling speed
4,000 - 25,000 rpm
Tool holding fixture with collet ø
8 mm (0 5/16 in.)
Tool shank maximum
8 mm (0 5/16 in.)
Tool shank minimum
3 mm (0 1/8 in.)
Milling cutter Ø, maximum
30 mm (1 3/16)
Weight without mains cable
2.1 kg (4.63 lbs)
Length of connecting cable
4 m (13 1/8 ft.)
Dimensions (W x L x H)
103 x 226 x 328 mm (4 1/16 x 8 57/64 x 12 29/32)
2.4
Emissions
The values stated are emission levels. Although there is a correlation between emission and imission level, it
cannot be reliably derived from this whether additional precautions are necessary. Factors influencing the
current immission level existing at the workplace comprise the duration of exposure, the room characteristic,
other sources of noise, etc. such as e.g. the number of machines and other adjacent machining operations. In
addition, the permissible immission level may differ from country to country. This information is nevertheless
suitable for providing the machine user with an improved assessment of the hazard and risk.
2.4.1
Noise emission specifications
Noise emission values determined according to DIN EN ISO 3744:
Sound pressure level
L
PA
= 71 dB (A)
Uncertainty
K
PA
= 3 dB (A)
Sound power level
L
PA
= 82 dB (A)
Uncertainty
K
PA
= 3 dB (A)
The noise measurement was done without tool at idling speed.
2.5
Scope of supply
Edge cutter KF1000 complete with:
1 milling table, complete
1 face-milling cutter ø 19 mm
1 collet Ø 8 mm
1 open-ended spanner AF 17
1 operating manual
1 folder "Safety Instructions"
2.6
Use according to intended purpose
The KF1000 is exclusively suitable for flush milling and profile milling of wood, plastics and similar materials in
conjunction with the complete milling table included in the supply.
Содержание KF 1000
Страница 3: ...3...
Страница 4: ...4 KF 1000 1 4 000 min 1 2 7 500 min 1 3 12 000 min 1 4 16 000 min 1 5 21 000 min 1 6 25 000 min 1...
Страница 5: ......