MAFA 7890, Руководство пользователя

Страница: 14 / 18

14
5.1 Kon
The cone consist of 2+2 coneplates and a outlet.
It is important that the plates are assembled as below for the outet to fi t.
Coneplates with the same hole pattern shall be assembled together
Assemble the cone plates with screw M8x16 and nuts.
Put the outlet on to of the plates and fasten it with screw M8x16 with plastic washer and nut.
NOTE! The nut on the outside of the cone.
NOTE! Do not use the holes in the middle. This is where the bag knife is going to be fastened
5 Assembly
•
Read the manual carefully.
• Unpack the material and identify all parts and check against the list so that everything is included.
• Use work gloves when handling sheet metal parts, as they may have sharp edges.
• Diff erent tools are needed to assemble the stand. Wrench 13, 16, 17 mm.
Screwdriver can be used to center the holes.
•
See page 17 for information of where to put screws and nuts.