background image

Maeving  

|

 RM1 Owner’s Handbook

44  

 

MAINTENANCE AND ADJUSTMENT 

MAINTENANCE AND ADJUSTMENT

Maeving cannot accept any responsibility for damage or injury 
resulting from incorrect or improper adjustment carried out by non 
Maeving-approved technicians or owners.
Always have any scheduled maintenance carried out by the Maeving 
Workshop Team or a Maeving Workshop Partner.
It is important to maintain your motorcycle in a safe, reliable condition 
at all times. You should carry out the daily checks as outlined and 
follow the scheduled maintenance and adjustments as specified.

Scheduled maintenance

Any scheduled maintenance should be undertaken by the Maeving 
Workshop Team or a Maeving Workshop Partner.
Scheduled maintenance should only be carried out at intervals of 
mileage or months, depending on the use of the motorcycle.
Initial scheduled service interval of 600 miles or three months 
(whichever occurs first) to be carried out by the Maeving Workshop 
Team or a Maeving Workshop Partner. 
Thereafter, scheduled service intervals of 3000 miles or annually 
should be undertaken by the Maeving Workshop Team or a Maeving 
Workshop Partner.

Throttle control

Smooth throttle function is essential for yours and the motorcycle’s 
safety. Make sure that the throttle control is operating normally. This 
should be carried out during the daily checks. For further information, 
see Daily safety checks on page 38.
Open the throttle and release it to verify that the throttle is operating 
smoothly and returning to its resting position correctly. Make sure you 
know how the throttle feels during normal operation. If you detect any 
changes to how the throttle feels or notice that the throttle is slower 
or sticking at any point, contact the Maeving Workshop Team. For 
further information, see Contacts on page 6.

Warning

: Changes in throttle action may be due to wear, dust 

or dirt and could lead to a sticking throttle. A sticking throttle 
control could lead to loss of control of the motorcycle and an 
accident.

!

!

!

Содержание RM1





















































































Отзывы: