maestrowave MW18Ti60Hz, Руководство по эксплуатации, Страница: 9 / 16

8
A
UTO
C
OOK
The system has 297 auto cook menus to be selected. You can adjust the power and time by operating the control panel or
using a USB with Menu Creator™ software to download/upload menu settings. See pages 11-13 for further details.
To start menu cooking program:
For example: To start A-04 menu.
1.
In standby mode, open the oven door and place the food, close it.
2. Press number button 4 once.
3. Press START button once.
To set cooking time and power:
For example: To set b-01 menu.
1.
In standby mode, open the oven door. The oven door must remain open throughout this process.
2. Press PROG button once.
3. Press ABC button once. (For C menu options, press ABC button twice).
4. Press number button 1 once.
5. Press POWER button repeatedly to set power level.
6. Use number buttons to set cooking time.
7. Press ENTER button once.
NOTE: If you want to set the second and third segments, repeat steps 5 and 6.
For example: To start b-04 menu.
1.
In standby mode, open the oven door and place the food, close it.
2. Press ABC button once. (For class C menus, press ABC button twice).
3. Press number button 4 once.
4. Press START button once.
NOTE: If the memory is set to a locked state, press the number buttons to select the menu, and wait for 2 seconds, the system
will start automatically.
To delete menu data:
For example: To delete b-01 menu data.
1.
In standby mode, open the oven door. The oven door must remain open throughout this process.
2. Press PROG button once.
3. Press ABC button once.
4. Press number button 1 once (press twice for C menus, do not press for A menus)
5. Press STOP button once.
X2 F
UNCTION
The cooking time of the menu can be increased or decreased according to X2 button rate set. The X2 factory setting is 2.0.
For example: To cook b-04 menu with double time using X2 function.
1.
In standby mode, open the oven door and place the food, close it.
2. Press X2 button once.
3. Press ABC button once.
4. Press number button 4 once.
5. Press START button to start.
NOTE:

If you want to run class A menus, you can directly press the number buttons to select the menu after step 2. If you need
to set the class C menus, press ABC button once after step 3.

If the memory is set to a locked state, press the number buttons to select the menu, and wait for 2 seconds, the system
will start automatically.

If the cooking time after using the X2 function increases out of the allowable setting range, the microwave will not
operate when the START button is pressed.