Maestro PEDICURE SPA, Руководство пользователя

Страница: 16 / 26

-14-
DRAIN
Your Maestro Pedicure Spa may be equipped with a factory installed, built in discharge pump (if
ordered). To drain the water from the basin turn the jets off by pressing the “Jets” button and open the
drain by turning the drain handle (13) clockwise.
To begin the draining process, press the “Drain” button located on the Technician Control Keypad (12).
The pump will begin draining water out of the basin. It will automatically shut off after running continu-
ously for two (2) minutes. If your basin is completely emptied before two (2) minutes, simply press the
“Drain” button a second time to shut off the drain pump.
LEG SUPPORTS (7)
The Maestro’s dual and independent leg supports pivot upward to support the entire leg, not just the
foot. Feet are perfectly positioned for massage and pedicure treatments.
To utilize one or both leg supports, simply pivot it upward until it stops. To ensure a smooth upward
motion, place hand on the side of the leg support near the center. Gently push up until leg support
reaches a vertical position. Gently lift up on the front edge of the leg support and it will lock into place.
To unlock, gently lift the leg support straight up and carefully bring it down into the horizontal position.
WARNINGS:
DO NOT DROP THE LEG SUPPORT INTO THE STORING POSITION. GENTLY
GUIDE IT INTO PLACE. WHEN THE LEG SUPPORT IS IN THE VERTICAL POSITION DO NOT SIT
ON LEG SUPPORT.
MAESTRO
®
PEDICURE SPA