Maestro MR570, Руководство пользователя

Страница: 8 / 52

8
Food processing in the blender jar
To avoid spillage, the blender jar must be filled with products not
exceeding the maximum mark. Many products increase in volume
during processing. Use the blender to blend the ingredients with
water or another liquid (do not blend only dry foods).
With the switch (D/Fig. 1), select the required speed 1,2 or pulse
mode.
Pulse mode works only when the switch is pushed and held down.
Speeds 1 and 2 of the continuous cycle work until the switching arm
is returned to the «0» position.
To add products during blender operation, remove the plug (A/Fig.
1) from the lid and add the ingredients through the hole in the lid.
Preparation for work
- Before the first use remove packing material, make sure that all
parts of the device are not damaged.
Before the first use wash all removable parts with warm water and
detergent and thoroughly dry.
- It is prohibited to submerge the case of electric drive, its mains
connector and the plug in water or any other liquid.
Attention! At the time of the first switching on the device, a specific
smell or smoke may appear for a short time. These are normal
phenomena due to the presence of preservation materials on the
electric drive motor. They shall disappear after several minutes of
the device operation.