Maestro MR-450-BLUE, Руководство пользователя

Страница: 4 / 23

6 7
- THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY. DO NOT
USE THE APPLIANCE FOR ANYTHING OTHER THAN INTENDED
USE.
Purchase industrial devices for commercial use.
Actions in extreme situations:
- If a device tumbled into water, immediately, unplug the device, not
touching to the device or water.
- In case of appearance from appliance of smoke, sparkling, strong
smell of a burn isolation, immediately stop use the device, unplug
the device, appeal to the nearest service center.
Operation
General rules
This appliance is intended to grind classic roasted coffee beans. Be
careful, the appliance’s ideal for grinder up to 50 grams of coffee
each time. Do not excess the recommended amount of coffee
The grinding time must be in relation to the quantity of coffee
required.
Coarse ground: 10 Seconds
Average ground: 20 - 30 Seconds
Fine ground: 40 - 60 Seconds
ATTENTION! Do not excess the recommended operation time.
Do not use this appliance for grinding:
- too oily grinding grains (for instance peanuts),
- viscous-adhesive products (sugar, dried apricots), or too solid
products (for example, «green coffee» rice.)
Before the first use
- Remove packing and advertising materials and stickers.
- Inspect the grinder and make sure that there are no damages to
the device, power line cord, and plug.
- Unwind the power line cord completely.
- Place the device on a dry, even, stable surface.
Wipe the metallic bowl, the blade and the lid with a dry cloth.
The appliance must be unplugged.
Attention! At the time of the first switching on the device, a specific
smell or smoke may appear for a short time. These are normal
phenomena due to the presence of preservation materials on the
electric drive motor. They shall disappear after several minutes of
the device operation.
Grinding coffee
- Take off the lid, make sure there is no any items in the bowl.
- Put the coffee beans into the metallic bowl. Put the lid in place.
ATTENTION!
If the lid is installed incorrectly, the grinder will not turn on to the
grinding process.
- Place the grinder on the solid stable surface. Plug in.
- Hold the lid on firmly with one hand, push on the switch with the
other hand until the desired texture of coffee is achieved. Do not
take off the lid until the blade has completely stopped.
-When the blade has stopped rotating, unplug, take off the lid and
then remove the grounded coffee.
After using disconnect the device from the mains.
EN