Maestro EVA2235-H, Руководство пользователя

Страница: 14 / 20

V0.1
– May-13 User’s Manual
Page 14 of 18
6.4 ICC Jumper
Figure 11: ICC jumper
As l
ong as the VCC DIP switch is “ON” the ICC jumper is bridged. By putting the VCC
DIP switch to the OFF position the current draw of the A2235-H GPS receiver can be
measured directly by connecting a low resistance measurement device to the ICC
jumper.
The low resistance measurement device should be connected before VCC is
switched off!
7 NMEA Port

Default setting: 4800 baud, 8 data bits, no parity, 1 stop bit, no flow control!

Standard NMEA-0183 output on NMEA, baud rate selectable.

Standard USB connectors