21 Maestro E200 Series
www.maestro-wireless.com
These addresses are part of the designated private address range for use in private
networks, and should be suitable in most applications. If your network has a requirement
to use a different IP addressing scheme, you can make those changes here and click.
The LAN TCP/IP Setup settings are
IPv4 Address:
This is the LAN IP address of the modem router.
IPv4
Netmask:
This is the LAN subnet mask of the modem router. Combined with
the IP address, the IP subnet mask allows a device to know which other addresses
are local to it, and which must be reached through a gateway or modem router.
Advanced LAN configuration parameters could be found under
Network/Interfaces,
under
LAN parameters click
Edit > Advanced Settings.
9.3 WAN configuration
By default the WAN is in
automatic
mode, you can also set it to
Manual
or
PPPoE
9.3.1 Manual
IPv4 Address: The IP address to assign to the selected WAN interface.
IPv4 Netmask: The Subnet mask of the IP address above.
IPv4 Gateway: The gateway to assign this WAN interface.
DNS server: The DNS server for the WAN interface.
