- 6 -
[2] TRAVEL LEVER
•
When the sprocket (A) side is in the rear, the track frame faces
forward. When the track frame faces rearward, the direction
of travel lever operation is opposite to the direction of
machine movement (forward and rearward movement, right
and left movement direction).
When operating the travel lever, be sure to check if the track
frame faces forward or rearward.
Use this lever to move the machine forward/rearward, stop, change
the direction, and adjust the travelling speed.
•
(a) Forward movement: Push the lever forward.
•
(b) Rearward movement: Pull the lever toward you.
•
(N) Neutral: Release your hand from the lever.
NOTES
When the travel lever is operated to the forward or rearward direction
from neutral, the alarm sounds and notifies the surrounding area that
the machine will start moving.
[3] LEFT WORK EQUIPMENT OPERATION LEVER
Use this lever to perform slewing operation of the revolving super
structure and extension and retraction operation of the boom.
Slewing operation
•
(a) Right slewing: Pull the lever in the right direction.
•
(b) Left slewing: Push the lever in the left direction.
Extension and retraction operation of boom
•
(c) Retraction of boom: Pull the lever rearward.
•
(d) Extension of boom: Push the lever forward.
(N) Neutral: Release your hand from the lever.
The revolving upper structure and boom length retain their positions as they stop.
[4]
RIGHT WORK EQUIPMENT OPERATION LEVER
Use this lever to perform winch operation and boom derricking
operation.
Winch operation
•
(e) Hoisting: Pull the lever rearward.
•
(f) Lowering: Push the lever forward.
Boom derricking operation
•
(g) Lowering of boom: Push the lever in the right direction.
•
(h) Raising of boom: Pull the lever in the left direction.
(N) Neutral: Release your hand from the lever.
The hook block and boom angle retain their positions as they stop.
