MADRIX LUNA, Техническое руководство и краткое руководство по началу работы

Страница: 10 / 24

9
EN
Please note: DMX-OUT and DMX-IN can be used at the same time.
Operating Modes
You can mainly use 6 operating modes together with MADRIX
®
5:
� DMX-OUT via Ethernet network (Art-Net)
� DMX-OUT via Ethernet network (Streaming ACN)
� DMX-OUT via USB
� DMX-IN via Ethernet network (Art-Net Remote)
� DMX-IN via Ethernet network (sACN Input)
� DMX-IN via USB
You can connect MADRIX
®
LUNA over Ethernet network to the network card of
the computer that runs the MADRIX
®
5 Software or directly over USB. Data is
distributed to the device via network cabling or USB cabling and sent to the XLR
output ports for output ('DMX 1 – DMX 4/8/16').
First, completely switch off your supply of power for your fixtures/the device.
Second, connect LED controllers/fixtures to the XLR ports of MADRIX
®
LUNA.
Third, connect MADRIX
®
LUNA and your controllers/fixtures to power.
Fourth, connect to USB or to an Ethernet network for data as required
(see p. 8 for the correct network settings for your computer).
Fifth, make sure to activate the correct drivers in the MADRIX
®
5 Software:
– For USB, go to 'Preferences' > 'Options...' > 'Devices USB',
– For sACN, go to 'Preferences' > 'Options...' > 'Devices Network',
– For Art-Net, go to 'Preferences' > 'Device Manager...' > 'Art-Net'.
Sixth, configure and activate your devices in order to send or receive data:
– Go to 'Preferences' > 'Device Manager...' > 'DMX Devices',
– Go to 'Preferences' > 'Device Manager...' > 'DMX Input'.
Regarding DMX input and when connecting to DMX-IN, MADRIX ® LUNA will
automatically send the incoming data to the connected network (or over USB).
Use the web configuration to set up all relevant settings (see p. 8).
For more information, please read the MADRIX
®
5 user manual.