13
Specifications
The correlation between published specifications and sonic quality is
unreliable. A list of numbers reveals virtually nothing. All technical
measurements must be subject to qualitative as well as quantitative
interpretation.
Measurements of the Nº29 yield excellent results by any standards.
However, only those specifications that apply to the actual operation
of the amplifier are included here.
■
Rated power:
50W minimum continuous sine wave power into 8
Ω
,
with both channels driven from 20Hz to 20KHz with no more than
0.1% THD (FTC). 100W minimum continuous sine wave power into 4
Ω
with both channels driven from 20Hz to 20KHz with no more than
0.2% THD (FTC).
■
Peak output voltage:
30 volts @ rated line voltage @ 8
Ω
■
Frequency response:
(-3dB) 4Hz, 122KHz
■
Input impedance:
50K
Ω
shunted by 1.5nF
■
Voltage gain:
26dB
■
Power consumption:
Typically 100W @ idle, 200W @ rated power, 8
Ω
■
Overall dimensions:
See "Dimensions"
■
Shipping weight:
39.25 lbs. (17.8kg)
■
Connector complement:
Two RCA-type connectors
Two XLR-type connectors
Eight five-way binding posts
One IEC mains connector
For more information, see your Mark Levinson dealer, or contact:
Madrigal Audio Laboratories, Inc.
2081 South Main Street (Route 17), P.O. Box 781
Middletown, Connecticut 06457 USA
Telephone (203) 346-0896
(FAX (203) 346-1540
If purchased in North America, this Mark Levinson product’s warranty is owner-transferable.
Warranty conditions are valid only in the country where the product was originally purchased.
For warranty information and conditions on products purchased outside of North America,
contact your local dealer or regional distributor.