Madrigal Audio 23.5, Руководство пользователя, Страница: 10 / 16

10
2 1
3
2 1
3
Signal ground (shield)
Left-channel
XLR male
line-mount
(rear view)
Twisted pair
Right-channel
XLR male
line-mount
(rear view)
1 2
3
XLR female
line-mount
(rear view)
Twisted pair
Signal ground
(shield)
Figure 10: Balanced
bridging cable
2. Connect the bridging cable's male XLR-type connectors to the
Nº23.5's left- and right-channel XLR-type input connectors, taking
care to insert the correct cable end into its designated channel.
3. Connect the left-channel + (positive or red) output post of the
Nº23.5 to the + (positive or red) input terminal of the appropriate
loudspeaker. Connect the right-channel + (positive or red) output
post of the Nº23.5 to the – (negative or black) input terminal of
the same loudspeaker.
4. Repeat this procedure for the other Nº23.5 to be bridged.
If your preamplifier provides only single-ended output, follow the steps
below.
Single-ended
bridged operation
PUSH PUSH
– +
Loudspeaker
+ –
Nº23.5
– +
From preamplifier
single-ended main output
Bridging cable
Right
channel
Left
channel
Figure 11: Connections for
single-ended bridged
operation
1. Connect the appropriate channel of your preamplifier's single-
ended main output to the left-channel RCA-type input on the
rear panel of the Nº23.5.