WARNING: Always fasten the screws slowly and firmly, but without fitting them too deeply and tightly. Remember
that the various parts are made of wood, a material that risks breaking if you use too much force. Once the clim-
bing arch is fully assembled, check that all screws are fully secured.
- Mount the library on a soft surface, such as cardboard or a carpet.
- Remove all packaging material before starting assembly.
- Plan all steps in advance and make sure you have all necessary parts available.
available.
- Always keep hardware tools out of the reach of children.
EN
Step 1
Step 2
Insert the barrel into the drilled planes by matching the hole with the hole on the side of the plane as in Fig. 3
Lay the two sides on the floor, and after choosing the height of the plans according to the child's age and your needs,
insert the dowels and barrel screws into the holes as shown in the picture (fig.1). Care should be taken to place the
screw with the hole perpendicular to the side of the plan as in fig. 2. Do not strain the screw, rather make a turn
backwards.
Fig
. 3
Fig. 1
Fig
. 2
