①
On the back of the
MHF-R220BT (MHF
-R330BT)
unit you will see two pairs of
clips. Place the bottom pair of clips on
the underside of your existing Rearview
mirror. Lift the unit so that the bottom
clips extend allowing the top clips to be
fixed in position on top of your rearview
mirror and securely hold the handsfree
unit in place. Adjust the fitted unit to your preference for clear rear
vision.
②
Select a suitable position for the microphone depending on your vehicle
type, this should be placed close to the users head - the driver’s sun
visor is normally adequate.
“It is highly recommended to have the
front of the microphone (side with more holes) directly facing the
operator for the best voice pickup.”
The microphone can be placed
either back or front of the visor by detaching, rotating and re-attaching
microphone holder to correct side of the microphone.
③
Clip a microphone on the driver’s sun visor recommended to keep a
distance of the microphone from the
MHF-R220BT (MHF-R330BT)
unit as long as possible.
④
Insert the power jack of the power adapter cable (4M).
⑤
Connect the Power Adapter Cable into its respective socket on the
MHF-R220BT (MHF-R330BT)
unit.
⑥
The power lead should be secured and hidden into the vehicles interior
using the seals or joins around the windscreen and door “A-Frame”
and under your dashboard. Ensure that you leave yourself enough
cable to be able to connect to your cigarette lighter socket.
Note :
Please ensure that the microphone and power cable do not interfere with
the safe operation of your vehicle.
Installation guide
6
7
Power On :
It appears
start
on the mirror.
Voice : “Power On”
2. You will hear a beep tone.
The HandsFree unit is
now ready to be paired
for the first time.
It appears
Pairing
on the mirror.
The MHF-R220BT (MHF-R330BT) supports both HandsFree and Headset
Profiles. The default profile is HandsFree. Follow the pairing instructions
for the first use, after that the unit will pair automatically.
1. When the power is on, press the “VOL
▲
▲
” button for
5 seconds.
Pairing your Bluetooth cellular phone
with the MHF-R220BT (or MHF-R330BT)
Pairing in “HandsFree” mode
Pairing with the
Headset mode
does not support
‘
Caller ID
’, ‘
Voice Dialling
’ and ‘
Reject Call
’
(
)
Main Body
Attach the Main Body onto the
existing rear-view mirror.
1. Browse your cellular phone menu and find the
connectivity and / or Bluetooth connection section.
2. Select the “search for” a new HandsFree device
function and allow the phone to find the
MHF-
R220BT (MHF-R330BT)
.
Note :
Each cellular phone type has distinct phone menu so
you may need to refer to your manufacture’s
instructions for the correct procedure on how to
“connect a new Bluetooth device”.
Cellular phone pairing
continue to next page..
All manuals and user guides at all-guides.com