©Copyright Lotronic 2015
Trouble-Shooting
If the product is not operating properly, make a check of the items in the table
below. If the problem persists, a malfunction may be assumed. Disconnect the
power immediately and contact the store where the unit was purchased.
Problem
Causes
Corrections
No sound
•
Insecure speaker lead
connection.
• Audio frequency
input terminal
connected
improperly.
• Mains plug & AC jack
connection is
insecure
•Volume control sets to
minimum.
•Speaker output not in
right position
• Connect securely.
• Check the audio frequency
terminal.
• Connect the power properly.
•Tum volume up to a suitable
level.
•Put the speaker output at right
position
Distortion
•The volume is too loud.
• Reduce volume.
Specifications
Output power RMS
60W @ 4 ohm
THD (at rated conditions)
≤2% (50
-20kHz)
S/N ratio (line in)
≥75dB (A
-weighted)
Impedance
4 Ohm
Frequency response
50Hz – 20kHz
Rated input level/impedance
Line in: 500mV
Input voltage
220 – 240Vac 50/60Hz
Consumption
≤
35W
Dimensions
220 x 180 x 935mm
Net / Gross weight
10.1kg / 11.4kg
The above specifications are for reference only.
Design and specifications are subject to change for improvement without prior
notice.
