Step 2. Turn over the Table Top (P1) on a flat, soft surface such as a carpet or cloth to prevent scratching the finish.
Attach the Base to the Table Top (P1) as shown below.
Step 3: Turn the Desk over and place it upright on a level surface. Insert the Plastic Cap (H5) to cover the Bolt
holes as shown below. Assembly is complete.
(H1)x6
(H2)x6
(H3)x6
Bolts
Lock Washer
Flat Washer
H1
H2
H3
H4
P1
P3
P2
P5
P4
H5
(H5)x4
Plastic Cap
ADDITIONAL NOTE ABOUT SAFETY:
BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE.
THEY SHOULD BE INSPECTED AT LEAST EVERY
3
MONTHS AND RE-TIGHTENED AS NEEDED TO PREVENT DAMAGE OR
INJURY
,
AND ENSURE STABILITY.
