Step 4. Attach the seat frame(P8) to the bottom of the assembled arms (P6&P7) and seat cushion (P2) and back
cushion (P1) as shown below.
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO BE SURE THAT ALL
HARDWARE IS KEPT TIGHTENED.
Step 6. Turn the assembled chair to an upright position. Make sure the chair is level and s ecurely tighten all bolts
with Allen wrench ( H7). Assembly is complete.
Failure to follow these instructions may cause the bolts to
misalign during assembly.
Step 5. Attach the front legs (P3) and the left back leg (P4) and the right back leg (P5) to the assembled seat
frame (P8) as shown below.
H3
H4
H6
H7
H8
H2
H4
H5
H7
P3
P3
P8
P5
P4
P8
P2
Note: There is arrow label
on the seat frame, make
sure the seat frame on
right position.
