Step 2. Turn the Ottoman (P2) upside down and lay on soft, flat surface. Position the legs (P1) onto sticker.
A
lign the holes with the mark on the sticker and attach legs with the PH Screw (H 1) to the bottom of
Ottoman (P2) by using Screw Driver (Not provided).
Hl P.H SCREW
P1
Sticker
Sticker
Step 3. Turn the Ottoman over.
8 PCS
P1
Sticker
Sticker
SCREW DRIVER
(Not Provided)
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO BE SURE THAT ALL
HARDWARE IS KEPT TIGHTENED.
Thank you for your purchase
Page 2 of 2
