Step 2.
1) Turn the assembled table to an upright position. Make sure the table top frame and the shelf frame are even,
and then securely tighten all bolts with Allen wrench (H2).
2) Place the clear plastic pad (H 3) on the assembled table as shown below.
3) Gently lay the glass top (P1) and mirror shelf (P2) on the assembled table .
4)
Leveler adjustment:
Leveler are installed on the legs and adjust as needed to make sure the table is
level. Assembly is complete.
Caution:
Failure to follow these instructions may cause the bolts to misalign during assembly.
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO BE SURE THAT ALL
HARDWARE IS KEPT TIGHTENED.
(H3)x12