Madimack ECO, Руководство пользователя, Страница: 29 / 51

29
4.
WiFi Operation
For video tutorials and further help please visit www.Madimack.com.au FAQ for all you need to do and
full walkthrough. It is crucial that the WiFi is over the machine and is of a high power, the WiFi is a
cloud based solution and needs the WiFi to be active on the machine for it to receive a signal.
a.
Make sure to switch off your data package on your phone prior pairing the heater, Mobile data can
interrupt the connection process in some cases therefore failing to connect the unit.
b.
Your phone should be displaying full Wi-Fi strength with -50 DB > to ensure that you have enough
signal strength for the heater to connect
c.
To reset the Wi-Fi settings on the heater, do the following:
I.
Unlock the controller by holding the lock button on the far left for 3 seconds, the buttons
will illuminate indicating that the controller is unlocked.
II.
Hold The power button (for about 10 seconds) till you see the Wi-Fi signal on the
controller flashing slowly
III.
Slow Wi-Fi signal blinking means that the settings have been reset, follow the same
instructions below to pair the heater with your mobile device