Madill 3000, Руководство по эксплуатации и техническому обслуживанию

Страница: 10 / 44

7
Starting spray of any kind is
never permitted
NEVER start the engine
without an air filter in place
Cab to Riser bolts to be
torqued to 1100 Ft.-lb. per bolt
with Loctite C5-A applied.
SAFETY PRECAUTIONS
Before you start
Know your
machine; become familiar with the machine’s work envelope/area. Adhere
to proper cleaning and maintenance schedules. Do not operate the machine without
wearing PPE as per your worksite and/or local regulations. Ensure protective guards
are in place. Check height, weight and width restrictions for your work area. Be sure
you know about any hazards, such as power lines. Be familiar with the hand signals
used in your workplace.
After Transporting
Always ensure all six cab to riser mounting bolts
are installed and properly torqued.
Starting Up
Make sure all controls are in proper position for
starting. Check for warning tags. Start the machine
only from the operator
’s cab and do not leave the
cab while the engine is running. Warm the
machine up gradually. Operate the machine to
confirm correct functions. Report any unusual
noises or conditions for immediate repair.
Before Performing Service
Place attachment on ground, shut off engine and
remove keys from ignition. Attach a “DO NOT
OPERATE” tag in an obvious place in operator’s cab.
While Operating
PAY ATTENTION! Know the working range of your machine. Know where any
obstructions might be. Be sure everyone is in the clear before moving any part of the
machine. Never swing or position any attachment or load over ground crew or
vehicles. Never allow anyone to ride on any attachment or load. Never attempt to
operate the machine from any position outside the operator
’s cab. Never operate in a
location where the machine or load may contact electric power lines. ALWAYS
operate with seat belt fastened.