MadgeTech Logicbus X Series, Руководство пользователя

Страница: 4 / 4

RTDTempX Series
PRODUCT USER GUIDE
Product Support & Troubleshooting:
MadgeTech 4 Software Support:
Device Maintenance
Primary LED (Green):
Solid when communicating with computer.
Flashes every 15 seconds when logging.
Flashes every 5 seconds when in delay
start.
Secondary LED (Red):
Flashes every 5 seconds when battery is
low.
Flashes every 5 seconds when memory is
low.
Channel LED (Blue):
Flashes every 2 seconds when reading rate
is 2 seconds or faster.
Flashes same as reading rate when reading
rate is slower than 2 seconds.
• Visit our Resources online at madgetech.com/resources .
• Contact our friendly Customer Support Team at (603) 456-2011 or support@madgetech.com .
• Refer to the built-in help section of the MadgeTech 4 Software.
• Download the MadgeTech 4 Software Manual at
madgetech.com .
• Contact our friendly Customer Support Team at (603) 456-2011 or support@madgetech.com .
Recalibration
Recalibration is recommended annually. To send devices
back for calibration, visit madgetech.com .
Battery Replacement
Materials: 3/32 inch HEX Driver (Allen Key) and a
Replacement Battery (U9VL-J)
1. Remove the cover from the device by unscrewing the
two screws.
2. Remove the battery from its compartment and unsnap
it from the connector.
3. Snap the new battery into the terminals and verify it is
secure.
4. Replace the cover taking care not to pinch the wires.
Screw the enclosure back together securely.
Note:
LED Functionality
Be sure not to over tighten the screws or strip the threads.