wireless LAN adapter. The front of the PCMCIA adapter (which has the LED and “Smart Wireless”
label on it) must be inserted such that it is next to the PCI adapter’s circuit board as follows:
7 Specification
PCI Local Bus Specification Revision 2.1 compliant.
PCMCIA 2.1, JEIDA 4.1, and CardBus compliant.
3.3V/5.0V operation.
Intel 82365SL register compatible, ExCA compatible.
ATA disk interface support.
Supports Hot-Swapping—inserting and removing a PC Card without shutting down system.
Power saving suspend mode support.
Ambient temperature under bias 0
o
C to 70
o
C.
Storage temperature –65
o
C to 150
o
C.
PCI-to-PCMCIA host bridge R5C475 II.
Max. Power Supply on sockets VCC at 3.3V for 1A and VCC at 5.0V for 1A.
8 Troubleshooting
If your computer is COMPAQ DeskPro EN series, you may encounter the following problem:
System freezes while booting up after installing PCI adapter in the computer.
Solution:
Before installing the PCI adapter, please go to
http://www.compaq.com/
Download the latest version of ROMPaq ROM Image (V2.11 or later), then follow the instructions
COMPAQ provides to update the system BIOS. You can install the software and hardware of PCI
adapter without problems after a BIOS update.
NOTE:
only gentle effort is required to insert a PC card into the PCI adapter. If you have a problem
inserting a PC Card into the socket, please do not force the card, because it may cause unexpected
damage to the PC card or PCI adapter.
If you have any further questions, please contact your local dealer.
100-409-01
Copyright © 2002 Madge Networks. All rights reserved.
Page
4
