100-240-01
5
Insta
lling the
Backup
PSU
Chapter 2
Installing the Backup PSU
Hazard:
To make sure you do not injure yourself or damage your Madge product, always refer to the
installation manual and the Madge Safety Guide (part number: 100-002) before installing hardware. If
you are in any doubt, contact your customer support representative.
When you install the Backup PSU for the first time, the installation procedure consists of the
following tasks:
1
Rack-mounting the Backup PSU
The Backup PSU is designed to fit into a standard 480 mm (19 in.) rack.
2
Connecting the power cables
Warning:
Electrical current from power, telephone, and communications cables is hazardous. To
avoid an electrical shock when installing or moving the product or devices attached to the product,
connect and disconnect cables as shown in the Madge Safety Guide (part number: 100-002).
!
install.fm4 Page 5 Tuesday, August 13, 1996 2:05 PM
