Madel ZONING ZOE, Руководство пользователя

Страница: 15 / 36

Timer-thermostat ZOE
v 0. V 03/16 0 ZOE Timer-thermostat
13
EN
Setting the time (SE3, fig. 4)
Time must be set in order to carry out weekly programming.
This is carried out as follows (follow the diagram in figure 4):
1 With the thermostat on, press the "SET" key (SET
appears), then "INFO" (SE3 appears), followed by "ON/
OFF" to confirm.
2 Use the +/- keys to select the time (keeping fast forward
pressed down) and confirm by pressing "ON/OFF".
3 Use the +/- key to select the day of the week and confirm
by pressing "ON/OFF".
4 The display shows "rEC" and programming finishes.
Fig. 4
Locking the control (SE4)
Operation of the "MODE", "FAN", "PROG" and "ECO" keys
can be locked to prevent loss of setting.
• Press "SET" followed by "FAN" (SE4 appears) and "ON/
OFF" to confirm.
– If "bL00" appears, the control is unlocked.
– If "bL01" appears, the control is locked.
Enabling weekly programming
Weekly startup and shutdown programming can be
established for each zone. Up to 3 different shutdown/
startup intervals can be adjusted in 1-hour timeslots with 2
COMFORT and ECONOMY temperature levels.
• Press the "PROG" key (10) to enable the option.
• Press the "PROG" key again to disable it.
Setting weekly programming (SE5, fig. 5)
Weekly programming is carried out as follows (follow the
diagram in figure 5):
1 With the thermostat on, press the "SET" key (SET
appears), then "PROG" (SE5 appears), and finally "ON/
OFF" to confirm.
2 Press "SET/DAY" to select the day to be programmed.
3 Pressing the +/- keys, select the start of the timeslot
(system connection) and confirm by pressing "ON/
OFF".
– Move forward by pr/- to programme comfort
temperature (marking the two rows of dots on the
operating hours)
– Move forward by pressing ECO to programme
economy temperature (marking only the bottom row
of dots, on the operating hours)
4 Finish the timeslot (system disconnection) by pressing
"ON/OFF"
5 If required, repeat operations 3 and 4 to programme
another timeslot. A maximum of three daily timeslots
can be programmed.
6 Press "SET/DAY" to programme the day and move onto
the next one.
• Press "PROG/COPY" to move onto the next day,
copying the day’s timeslots.
• The day's timeslots can be cleared by pressing the
"INFO/CLEAR" key (first selecting the required day, as
indicated in step 2).
7 Move forward by pressing "SET/DAY" to the end to exit
programming. Failure to do this will mean the
programming is not stored.
Z
MASTER MASTER OFF OFF
ON ON SYST SYST
ECO
PROG PROG
1 2 3 4 5 6 7
2 4 6 8 10 10 12 12 14 14 16 16 18 18 20 20 22 22 24 24
ºC
TIMER TIMER
Z
MASTER
MASTER
OFF OFF ON ON SYST SYST
ECO
PROG PROG
1 2 3 4 5 6 7
2 4 6 8 10 10 12 12 14 14 16 16 18 18 20 20 22 22 24 24
ºC
TIMER TIMER MASTER MASTER OFF OFF
ON ON SYST SYST
ECO
PROG PROG
1 2 3 4 5 6 7
2 4 6 8 10 10 12 12 14 14 16 16 18 18 20 20 22 22 24 24
TIMER TIMER
Z
MASTER
MASTER
OFF OFF ON ON SYST SYST
ECO
PROG PROG
1 2 3 4 5 6 7
2 4 6 8 10 10 12 12 14 14 16 16 18 18 20 20 22 22 24 24
ºC
TIMER TIMER
SET
DAY
INFO
CLEAR
ON/OFF
Z
MASTER MASTER OFF OFF ON ON SYST SYST
ECO
PROG PROG
1 2 3 4 5 6 7
2 4 6 8 10 10 12 12 14 14 16 16 18 18 20 20 22 22 24 24
ºC
TIMER TIMER
Z
MASTER
MASTER OFF OFF ON ON SYST SYST
ECO
PROG PROG
1 2 3 4 5 6 7
2 4 6 8 10 10 12 12 14 14 16 16 18 18 20 20 22 22 24 24
ºC
TIMER TIMER MASTER MASTER OFF OFF ON ON SYST SYST
ECO
PROG PROG
1 2 3 4 5 6 7
2 4 6 8 10 10 12 12 14 14 16 16 18 18 20 20 22 22 24 24
TIMER TIMER
Z
MASTER
MASTER OFF OFF ON ON SYST SYST
ECO
PROG PROG
1 2 3 4 5 6 7
2 4 6 8 10 10 12 12 14 14 16 16 18 18 20 20 22 22 24 24
ºC
TIMER TIMER
SET
DAY
INFO
CLEAR
ON/OFF
/
ON/OFF ON/OFF
/
1 2 3 4
1