MADECO MD-M12, Руководство по эксплуатации

Страница: 8 / 11

number flashing, press the UP or DOWN to set the
parameter.
If the MD-M2 K=0.065 mL/M, plase set C- P to 0.065 (the
measuring unit will be mL)
7) Press to
SET
the
[F-P]
To set the
instance flow. If the MD-M2 K=0.065mL/M, the parameter F-P
shall be set to 0.065*60=3.9, then the measuring unit will
be mL/M.
8) Press to set the RAN Set the instance
flow Decimal point ,tap the left key the parameters is
flashing ,press the up or down key to set the Decimal
point.
Item2: MD-M9 test the total flow unit: L
Test the Instantaneous flow Unit : L/H
The k of M9, K=5.1 ml/p
1. Setting Procedure
1) Wiring; (Refer the Wiring)
2) Power on;
3) Press the SET key over 5s , to enter the setup mode
4) Tap press
SET
key, rolling down setting the parameters;