19
DPI change
The mouse has 6 different DPI settings, and you can switch between them using the button located on the bottom
of the mouse.
1. To change the DPI, press the button on the bottom of the device.
2. After pressing the DPI change button, observe the illuminated led edge. Illuminating the illuminated led edge to
one of 6 colors will notify you which DPI setting has been selected.
Backlight colour
DPI set by default
Red
800 DPI
Green
1600 DPI
Blue
2400 DPI
Yellow
3200 DPI
Cyan
4800 DPI
Violet
7200 DPI
Each DPI profile can be edited using software that can be downloaded from the manufacturer’s website.
RGB backlight
The mouse has 10 different RGB LED backlight modes. From the device level, this backlight can only be turned on or
off. To do this, hold down the DPI change button and the left mouse button at the same time for 3 seconds.
SOFTWARE
Software intallation
1. Go to http://maddog.pl/sterowniki/sterowniki-i-instrukcje.
2. Select the type of device and its model.
3. Download the software installation file.
4. Install the software from the installation file on your computer.
