HANDHELD MIC
19. ANT B: Antenna of wireless microphone 2.
20. MIC IN 2: To connect wired dynamic MIC.
21. MIC IN 1: To connect wired dynamic MIC.
22. Input: To be connected to DVD , Streamer, Computer or any other
Audio or A/V source.
23. Output: To be connected to Active Speakers, Hi Fi system, TV or
for audio and video out.
24. DC IN: Connect DC end of supplied power adapter here. Connect
AC end of power adapter into a suitable mains power socket.
25. ANT A: Antenna of wireless microphone 1.
Screens
Parts Description
1
4
2 3
1. Grille(Capsule inside)
2. Power/low battery Indicator
3. Power ON/OFF/MUTE Switch
4. Battery Compartment/Cover
Operation
1. Open battery cover. Install the provided 2pcs 1.5V AA batteries and
then close the cover. Pay attention to the correct polarity.
2. Push power switch to ON position, power indicator should flash once
briefly indicating that the transmitter has sufficient power. If the power
LED indicator stays on, it indicates that the battery has insufficient
power and should be changed. If the power LED indicator does not
light at all and the transmitter does not work, it indicates the battery is
dead and you should change the battery.
3. Now receiver RF indicator should light(Please confirm frequency of
microphone same as that of receiver before operation).
4. Push power switch to MUTE position to mute the sound.
5. During operation if power indicator lights red, this indicates the battery
is Iow. Please replace new battery.
6. If the microphone is not going to be used for any length of time, push
power switch to OFF position and remove the battery.
WWW.MADBOY-AUDIO.COM
2
MIXER/RECEIVERMIXER