madbeanpedals Wavelord, Руководство пользователя

Страница: 8 / 14

Notes Wavelord
madbeanpedals
External Jack:
The external jack option is a copy of the Opto1 driver but the LED is replaced with a 1/8” jack. This
allows you to connect the Wavelord to another optically-based modulation effect and thus creating a
“master tap” controller with the Wavelord.
The external 1/8” jack is an optional mod and you do not have to include it. If you do not wish to use
the jack omit R26, R27 and Q4.
There will be future mbp projects that interface with the Wavelord for tap tempo controlling such as
the upcoming “Glasshole” phaser project. The Wavelord will also interface with the Tapanator projects
from a few years ago (these included a Wah and Phaser 1590A projects).
For more explanation on how to link the TAPLFO to a second device, please refer to the
Tapanatorator build guide.
http://www.madbeanpedals.com/projects/Tapanatorator/Tapanatorator.pdf
Opto1 has solder pads for both the VTL5C9 and NSL32. I recommend
using the 5C9. It is a more expensive parts, however, having tested both
devices in this build the 5C9 does a better job of pulling out finer detail
in some of the more esoteric waveforms in Bank2. If you cannot get the
VTL5C9, use the R3 version of the NSL32.